low-pressure fabric hose >> fabric hose >> Low Pressure Fabric Hose
 
        
Name:
Low Pressure Fabric Hose
   
Class:
low-pressure fabric hose>>fabric hose
   
 
   Product Readme
Characteristics:
 
1. CONSTRUCTIONS: This hose consists of an inner tube of oil synthetic rubber, one or multilayer spiral fabric reinforcements, and an oil and weather resistant synthetic rubber cover.
 
2.CHARACTERISTIC: This hose have almost no tolerance, and they are capable of resistance to oil and water, light, small flexible and wear well. The minimum explosive pressure is fourfold to work pressure.
 
3.APPLICATIONS: All kinds of steel wire (or suck) hose are made in suitable materials due to different purpose. Their advantages are logical design, excellent quality, durable. They are used to send or suck (under press) many kinds of liquid power solid etc.
 
Name
Inside diameter mm
Performance and use
Remarks
Steam hose
13-76
Transport 170¡£C following saturation steam or cross hot water, working pressure steam 0.35MPa,hot water 0.8MPa
 
Oil piping hose
13-152
Suck and send petrol engine oil, lubricating oil and other mineral oil at room temperature. Working pressure is  0.5-1.2MPa
Can also adopt the other armor structure
Foodpipe hose
25-152
Attract the milk type, drinks, edible oils and liquid beverage. Working pressure is 0.5-0.8MPa
 
Acid or alkali piping hose
25-203
Send the rare acid, alkali solution at   room temperature. Working pressure is 0.5-0.7MPa
The interior glue layer can adopt the man base glue while sending the dense acid, the cloth layer can adopt the glass fibre.
Wearing sandblast hose
25-102
The wind pressure gushes out the sand   and uses the hose. Working pressure is 0.6MPa
The tank wagon of cement is used and in charge of being can also be produced according to this
Tank elbow pipe
25-102
The locomotive water tank inputs water to use
 
Drilling hose
51-102
Able to bear press, be wear-resisting, able to bear oil, use as well drilling machine Ti strength in charge of faucet with stand flexible union pipe to in charge of flange. Working pressure is  10-30MPa
Both ends have metal to connect
Nylon fiber spiral oxygen blowing hose
51-127
The pure oxygen top-blown converter uses the flexible union pipe, working pressure is 1.5MPa, can also adopt the steel wire to weave the withholding type, working pressure can reach 8MPa
The metal flange of sulfide of both ends, there is asbestos anti abrasion layer outside
Mud piping hose
196-900
The dredger is arranged (suck) the silt is used, working pressure is 0.4-0.5MPa
There can be flange to connect according to the need of designing
Hole making
25£¬32£¬40
Make the hole to use in project buildings such as the bridge highway, etc., bear pulling force as 1.5-2.30Kg/root.
The outer glue has good tearing the performance of drawing.
 
Technical parameter£º
 
Inside diameter£¨mm£©
Working pressure
£¨Mpa£©
Burst pressure  
£¨Mpa£©
Length of the hose
Nominal size
tolerance
size£¨m£©
tolerance£¨mm£©
13
0.8
0.5
0.7
1.0
2.0
2.8
4.0
20
200
16
0.8
0.5
0.7
1.0
2.0
2.8
4.0
20
200
19
0.8
0.5
0.7
1.0
2.0
2.8
4.0
20
200
25
0.8
0.5
0.7
1.0
2.0
2.8
4.0
20
200
32
1.2
0.3
0.5
0.7
1.2
2.0
2.8
20
200
38
1.2
0.3
0.5
0.7
1.2
2.0
2.8
20
200
51
1.2
0.3
0.5
0.7
1.2
2.0
2.8
20
200
64
1.5
0.3
0.5
0.7
1.2
2.0
2.8
20
200
76
1.5
0.3
0.5
0.7
1.2
2.0
2.8
20
200
 
¡¾Print¡¿ ¡¾Close¡¿
 
 
 
 
 
Copyright © TIANJINYAYU Technical support £ºNETJIN